handyfloss

Update: read second comment

I recently upgraded to [[Ubuntu]] Jaunty Jackalope, and have experienced a much slower response of my desktop since. The problem seems to be with [[Intel GMA]] chips, as my computer has. The reason for the poor performance is that Canonical Ltd. decided not to include the [[UXA]] acceleration in Jaunty, for stability reasons (read more at Phoronix).

The issue is discussed at the Ubuntu wiki, along with some solutions. For me, the fix involved just making [[X.Org Server|X.org]] use UXA, by including the following in the xorg.conf file, as they recommend in the wiki:

Section "Device"
        Identifier    "Configured Video Device"
        # ...
        Option        "AccelMethod" "uxa"
EndSection

Well, not much of a “plan”, but bear with me.

Ever since using [[Debian]] and [[Ubuntu]], I have installed the OS just once per computer. All software upgrades, including full releases, have been done through upgrades, not re-installations. This means that I have never actually had the need to download any ISO besides the first one used when I bought the computer.

This is fine, but I always felt the compulsion to share my bandwidth with fellow Linux users, and relieve some load from the [[Canonical Ltd.]] servers. So for every new Ubuntu release, I have downloaded one or more (amd64, i386, desktop, alternate…) Ubuntu CD ISOs via BitTorrent, and kept them uploading for some time. However, the full BT download of the ISO is a waste of bandwidth, and unless my later upload share is greater than 1.0, I will have been overloading the servers, not relieving them.

Now, with Jaunty Jackalope, I have a way to fix this. I could have done similarly with previous releases, but I didn’t. Here’s the deal: download the ISO and share it with BitTorrent, but don’t upgrade from the Internet as well. Upgrade from the ISO I just downloaded! In the past I would be reluctant to do this, among other things because I don’t want to waste a physical CD for that. However, the Ubuntu upgrade instructions say how to mount the ISO (yes, mounting ISOs is not new. I’ve done it in the past), then upgrade from the mounted image. Once the upgrade is done, I can keep seeding the ISO with BitTorrent.

With this procedure I can use bandwidth more efficiently (I download the required software just once), and I can still share the ISO with other people. Moreover, there is another plus: the ISO is just 699 MB, whereas the upgrade manager in Ubuntu tells me that for the upgrade I will need to download more than 1 GB! The difference is due to the ISO being somehow compressed, I think. I will report on the size of the file system mounted from the ISO (which should be much more than 1 GB).

Update: Well, actually the internet upgrade involves more packages. If you upgrade from the CD, you are still required to download 800 more MB to complete the upgrade, so no magic there.

I recently started looking for some system/format to dump personal stuff on. I checked my own comparison of wiki software, and chose [[MoinMoin]].

I have already installed some [[MediaWiki]] wikis for personal use, and I consider it a really nice wiki system. However, one of its strengths is also a drawback for me: the backend is a database. I want to be able to migrate the wiki painlessly, and with MediaWiki this is not possible. There is no end to the files and database dumps one has to move around, and then it is never clear if there is still something missing (like edit history or some setting). I want to have a single dir with all the data required to replicate the wiki, and I want to [[rsync]] just this dir to another computer to have an instant clone of the wiki elsewhere. MoinMoin provides just that (I think, I might have to change my mind when I use it more).

So here you are the steps I took to have MM up and running in my Ubuntu 8.10 PC.

Installation

Ubuntu has packages for MM, so you can just install them:

Configuration

Create a dir to put your wiki. For example, if you want to build a wiki called wikiname:

We made it a subdir of a global dir “MoinMoin”, so we can create a wiki farm in the future.

Next you have to copy some files over:

If installing a wiki farm, you could be interested in the contents of /usr/share/moin/config/wikifarm/, but this is out of the scope of this post.

The next step is to edit wikiconfig.py to our liking. The following lines could be of interest:

sitename = u’Untitled Wiki’
logo_string = u’‘
page_front_page = u”MyStartingPage”
data_dir = ‘./data/’
data_underlay_dir = ‘./underlay/’
superuser = [u”yourusername“, ]
acl_rights_before = u”iyourusername:read,write,delete,revert,admin”

Using

You just need to run wikiserver.py, there is no need to have [[Apache HTTP Server|Apache]] running or anything (like with, e.g., MediaWiki):

Then open your favourite browser and go to http://localhost:8080, and you will be greeted by the starting page.

I noticed that after my second eeebuntu install (see a previous post for a why to this reinstall), my Eee PC was a wee bit more noisy. Most probably it has always been like that, but I just noticed after the reinstall.

I put some sensor output in my [[Xfce]] panel, and noticed that the CPU temperature hovered around 55 degrees C, and the fan would continuously spin at around 1200 rpm. I searched the web about it, and found out that usually fans are stopped at computer boot, then start spinning when temperature goes up. This is logic. The small catch is that when the temperature in the Eee PC goes down, the fan does not stop automatically. This means that the fans are almost always spinning in the long run.

I searched for methods to fix that, and I read this post at hartvig.de. From there I took the idea of taking over the control of the fans, and making them spin according to the current temperature. For that, I wrote the following script:

#!/bin/bash

TEMFILE=/proc/eee/temperature
FANFILE=/proc/eee/fan_speed
MANFILE=/proc/eee/fan_manual

# Get temperature:
TEMP=`cat $TEMFILE`

# Choose fan speed:
if [ $TEMP -gt 65 ]
then
  SPEED=90
elif [ $TEMP -gt 60 ]
then
  SPEED=60
elif [ $TEMP -gt 55 ]
then
  SPEED=30
else
  SPEED=0
fi

# Impose fan speed:
echo 1 > $MANFILE
echo $SPEED > $FANFILE

The file /proc/eee/fan_manual controls whether fans are under manual (file contains a “1”) or automatic (file contains a “0”) control. File /proc/eee/fan_speed must contain an integer number from 0 to 100 (a percent of max fan speed).

I am running this script every minute with cron, and thus far it works OK.

Did I say “bimonthly” in my last report? Mmm, that was 3 months ago… You can read an intro for my Linux World Domination project in this May 2008 post.

As usual D2D means “days to domination” (the expected time for Windows/Linux shares to cross, counting from the present date), and DD2D means difference (increase/decrease) in D2D, with respect to last report. CLP means “current Linux Percent”, as given by last logged data, and DD means domination day (in YYYY-MM-DD format).

As promised, today I’m showing the plots for POEM@home, in next issue Prime@home.

Number of hosts percent evolution for POEM@home (click to enlarge)

Accumulated credit percent evolution for POEM@home (click to enlarge)

Yes, [[FLOSS]] also has its quirks and problems, and I am going to rant about some of them, that I run into the last week.

Problem 1: fsck on laptops

The reader might know that Linux comes with a collection of file system checkers/fixers, under the name fsck.* (where * = ext2/3, reiserfs, jfs, xfs…). When one formats a new partition (or tunes an existing one), some parameters are set, as for example in what circumstances fsck should be run automatically (you can always run it by hand). The typical setting is to run the command on each partition (just before mounting it) every N times it is mounted, or every M days.

It is also set that if a filesystem is not shut down cleanly (e.g., by crashing the computer or directly unplugging it), fsck will be run automatically on next boot (hey, that’s so nice!).

However, here’s the catch: on laptops, and with the aim of saving power, fsck will (tipically) not run automatically when on batteries. This seems a great idea, but you can imagine an scenario where it fails: shut down the laptop uncleanly, then power it up on batteries, and… voilà, you are presented with a system that seems to boot, but gives a lot of problems, the X don’t work… because the disk was corrupt, and wasn’t fixed on boot.

When this happened to me, I fixed it by booting while plugged. In principle you could also boot on single user mode, then chose “Check the filesystem” in the menu you will be presented (I’m talking about Ubuntu here), and fix the problem, even on batteries. But still, it’s annoying. IMHO fsck should run after unclean shutdowns, no matter being plugged or on batteries.

Problem 2: failed hibernate can seriously screw your system

I tried [[Hibernate (OS feature)|hibernating]] my laptop (a feature I keep finding problems with), but it was taking too long, and I was forced to shut it down using the power button. This, in itself, is a serious issue, but I could live with it.

But what I can’t live with is that after the event, I had no way of booting back! I tried all I could, and finally had to reinstall the OS. I am the one whom it happened to, and I still find it hard to believe: Linux so fucked up that you have to reinstall. I thought reinstalling belonged to the Windows Dark Ages!

Problem 3: faulty SD card

Since the problems tend to come together, it’s no surprise that I came across this error when trying to reinstall the machine borked with previous problem. The thing is that I was using a SD card as installation media, burning the ISO into it with [[UNetbootin]]. The burning didn’t burp any error, but the installation failed, usually (but not always) on the same point.

After minutes (hours?) of going crazy, I burned the ISO into another SD card, and it worked like a charm.

My complain is not that the SD was faulty, which I can understand (hardware fails). What I am angry at is the fact that I checked (with the aforementioned fsck command) the FS in the card many times, and I reformatted it (with mkfs) many more times, and Linux would always say that the formatting had been correct, and that all checks where fine. I understand that things are sometimes OK, sometimes KO. I just want to know when is which!

I am attending the EGEE User Forum congress I have mentioned before, and we just had a talk delayed 5 minutes because of some stupid software problem.

The speaker had his talk in [[PDF]] format, really standard and portable. The organizers provided him with a Windows machine, with Acrobat Pro installed (apparently). He tried to open the file with it, but it turns out the license for Acrobat had expired, so the computer refused to open the file. How horribly full of shit is that? There are thousands of free (and/or freeware) programs out there to read PDFs, so why was the poor speaker forced to use another computer just for the task? This would have never happened, obviously, had the organizers been using free software.

Yes, as the title implies, I am the fortunate owner of a [[Neo FreeRunner]]. For those not on the know, the NFR is a kind of mobile phone/[[Personal digital assistant|PDA]] running [[free software]], and aimed at being open, both from software and hardware perspective.

I bought it last week, and I already have things that I love, and others that I don’t love that much. First thing that sucks: my 128kB [[Movistar]] [[Subscriber Identity Module|SIM card]] is not supported, so I can’t use the NFR to make calls! Apparently older versions of the SIM card are supported, so I will try to get hold of one (by the way, the [[simyo]] card I posted about some time ago works perfectly).

Another thing that is not so good is the stability of the software. However, I expected that, and I have no problem with it. Being open source, the software will evolve day by day, and I will love to see the evolution.

On the bright side: it is really great to be able to install different [[Linux distribution|distros]] in your phone! I tried OpenMoko, FDOM, QtExtended (formerly Qtopia) and SHR, and all of them have good and bad things. It is like going back to when I tried different distros for my computers (now I mostly stick to [[Ubuntu]] or [[Debian]]). By the way, you can install Debian in the NFR (haven’t tried it yet, because you have to install it in the [[Secure Digital card|microSD card]], not in the main memory (it’s too big for it). You can even try Google’s [[Android (operating system)|Android]], if you so wish.

But the really nice thing about it is that you can create your own apps for it. You can install [[Perl]] or [[Python (programming language)|Python]] interpreters, and then use the [[Command-line interface]] (yes, it does have command line) to run scripts. Or create icons on the desktop and link them to an action. For example, I created an icon that switches from portrait to landscape orientation when pressing it, and then back when pressing it again. I created another icon that launches mplayer when pressed, so I can watch a video in it by just pressing the icon.

I expect to blog more about the gadget, so stay tuned.

It seems that the [[Fnac]] (at least the Spanish section) has been remodelling its web recently, which caused some downtime last week, and a really slow experience right now (their webmaster must lack the experience to realize that great changes should be made first in test computers, then moved to production ones. Or maybe they lack the resources to buy a spare server…).

Anyway, I’m visiting the place to check the prices of [[netbook|netbooks]], more precisely an [[ASUS_Eee_PC#Eee_901|ASUS Eee 901]], and, to my surprise, the [[Linux]] models are gone! I have previously seen both [[cruft|Windows XP]] and Linux-based netbooks in Fnac, but now only the former seem to survive. I suspect that the XP netbooks are always over-represented in stores, that is, they have many more XP units than Linux ones, even though they are sold on par. Or even more Linux units are sold.

However, this plain and simple oblivion of any Linux offer is outrageous, and can only point to nasty activity by Microsoft, who moves the necessary strings (money when possible, threats when necessary) to secure a niche (that of netbooks), that is one of the biggest market entry points for Linux, and thus the greatest menace to MS’s monopoly.

Right nowk, the Fnac Spain “Ultra Mobile” page (can not make a direct link because URLs inside the Fnac site are a thing to fear and hate), shows only one Acer Aspire One with Linux. All other netbooks, including all other Acer Aspire One models, and all Eee PCs, are exclusively Windows machines.

Update: The Linux Eee PCs seem to be back. Maybe it was just an error? Probably I’m just too paranoid :^)

I will start making this section bimonthly, otherwise the only content of my blog will consist on it. Besides, the new information generation rate is not enough to require more often updates.

You can read an intro for my Linux World Domination project in this May 2008 post.

As usual D2D means “days to domination” (the expected time for Windows/Linux shares to cross, counting from the present date), and DD2D means difference (increase/decrease) in D2D, with respect to last report. CLP means “current Linux Percent”, as given by last logged data, and DD means domination day (in YYYY-MM-DD format).

As promised, today I’m showing the plots for MalariaControl. In next issue: POEM@home.

Number of hosts percent evolution for MalariaControl (click to enlarge)

Accumulated credit percent evolution for MalariaControl (click to enlarge)